Raspberry Pi Camera Module 3 Wide | 樹莓派官方原廠相機模組 V3 廣角版

機模組 V3 廣角版

The Raspberry Pi Camera Module 3 is the latest entry in the Official Raspberry Pi range of camera
modules, offering a new 12 Megapixel Sony IMX708 image sensor, powered autofocus, improved low-
light sensitivity and HDR (High Dynamic Range) support!
The new Camera Module 3 is available with a standard 75° or wide-angle 120° lens (select version
before adding to cart), giving you more options for your specific project needs. As with the previous
generation, we also have an infrared-sensitive NoIR version available for night photography.
The module is capable of 4608×2592 pixel images and 4608×2592 @14 FPS/2304×1296 @56
FPS/1536×864 @120FPS video. When HDR is enabled, the resolution is limited to 2304×1296 @ 30
FPS.
《Compatibility (Important!)》

 The Camera Module 3 is mechanically identical to the previous Camera Module V2 apart from
the front sensor section. The new sensor is larger and may not fit all previous camera
accessories
 We are in the process of updating each camera accessory in the store to indicate compatibility
within the product descriptions
Software
 The Camera Module 3 can only be used with libcamera – the previous raspistill/raspivid
libraries will not work
 You will need to update Raspberry Pi OS as the Camera Module 3 requires a new driver and
a specific version of libcamera
Boards
 The Camera Module 3 is compatible with all Raspberry Pi boards with a camera connector
(CSI connector)
 To use this camera with a Raspberry Pi Zero (which has a smaller connector), you will need to
use an adapter cable
 
《Features》

 Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
 High signal-to-noise ratio (SNR)
 Built-in 2D Dynamic Defect Pixel Correction (DPC)
 Phase Detection Autofocus (PDAF) for rapid autofocus
 QBC Re-mosaic function
 HDR mode (up to 3-megapixel output)
 CSI-2 serial data output
 2-wire serial communication (supports I2C fast mode and fast-mode plus)

 2-wire serial control of focus mechanism
 
《Specifications》

 Sensor: Sony IMX708
 Resolution: 11.9 megapixels
 Sensor size: 7.4mm sensor diagonal
 Pixel size: 1.4μm × 1.4μm
 Horizontal/vertical: 4608 × 2592 pixels
 Common video modes: 1080p50, 720p100, 480p120
 Output: RAW10
 IR cut filter: Integrated
 Autofocus system: Phase Detection Autofocus
 Dimensions: 25 × 24 × 11.5mm (12.4mm height for Wide variants)
 Ribbon cable length: 150mm
 Cable connector: 15 × 1mm FPC
 Compliance:
o FCC 47 CFR Part 15, Subpart B, Class B Digital Device
o Electromagnetic Compatibility Directive (EMC) 2014/30/EU
o Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU
 Production lifetime: Raspberry Pi Camera Module 3 will remain in production
until at least January 2030
 
《Lens Specifications》

 Effective focal length 2.75mm
 f/2.2
 Diagonal field of view 120 degrees (at 16:9)
 35mm equivalent focal length roughly 16mm (full width) – 18mm (3:2 crop)
 Focus 5cm – infinity
 
《Resources》

 Product Brief：https://datasheets.raspberrypi.com/camera/camera-module-3-product-brief.pdf
 Raspberry Pi Camera Information
Page：https://www.raspberrypi.com/documentation/accessories/camera.html
 Libcamera information
page：https://www.raspberrypi.com/documentation/computers/camera_software.html#libcamera-
and-libcamera-apps
 Installing a Raspberry Pi
Camera：https://www.raspberrypi.com/documentation/accessories/camera.html#installing-a-
raspberry-pi-camera