PC Based Instrumentation and Control, 3/e

Mike Tooley BA; Advanced Technological and Higher National Certificates Kingston University

  • 出版商: Newnes
  • 出版日期: 2005-05-26
  • 定價: $1,980
  • 售價: 8.0$1,584
  • 語言: 英文
  • 頁數: 512
  • 裝訂: Paperback
  • ISBN: 0750647167
  • ISBN-13: 9780750647168
  • 立即出貨

買這商品的人也買了...

相關主題

商品描述

Description:

PC Based Instrumentation and Control is a guide to implementing computer control, instrumentation and data acquisition using a standard PC and some of the most popular computer languages.

Numerous examples of configurations and working circuits, as well as representative software, make this a practical, hands-on guide to implementing PC-based testing and calibration systems and increasing efficiency without compromising quality or reliability. Guidance is given on modifying the circuits and software routines to meet the reader's specific needs.

The third edition includes updated coverage of PC hardware and bus systems, a new chapter on virtual instruments and an introduction to programming and software development in a modern 32-bit environment. Additional examples have been included, with source code and executables available for download from the companion website
www.key2control.com.

 

 

Table of Contents:

Preface; The PC; PC expansion systems; Using the command line interface; Programming; Assembly language programming; BASIC and Visual BASIC programming; C and C++ programming; The IEEE-488 bus; Interfacing; PC instruments; Software packages; Applications; Reliability and fault-finding; Appendix A Glossary of terms; Appendix B SI units; Appendix C Multiples and sub-multiples; Appendix D Decimal, hexadecimal, binary and ASCII table; Appendix E Powers of 2; Appendix F Processor sockets; Appendix G Processor data; Appendix H Common file extensions; Appendix I BIOS error codes; Appendix J Manufacturers, suppliers and distributors; Appendix K Useful websites; Appendix L Bibliography; Appendix M Reference material available from the Web; Index

商品描述(中文翻譯)

描述:
《基於個人電腦的儀器與控制》是一本指南,介紹如何使用標準個人電腦和一些最受歡迎的電腦語言來實現電腦控制、儀器和數據采集。大量的配置和工作電路示例,以及代表性的軟件,使本書成為實用的、實踐性的指南,用於實施基於個人電腦的測試和校準系統,提高效率,同時不損壞質量或可靠性。本書提供了有關修改電路和軟件例程以滿足讀者特定需求的指導。第三版包括有關個人電腦硬件和匯流排系統的更新內容,以及一個關於虛擬儀器的新章節,並介紹了在現代32位環境中進行編程和軟件開發的方法。還增加了更多的示例,並提供了可從配套網站上下載的源代碼和可執行文件。

目錄:
前言;個人電腦;個人電腦擴展系統;使用命令行界面;編程;組合語言編程;BASIC和Visual BASIC編程;C和C++編程;IEEE-488匯流排;接口;個人電腦儀器;軟件包;應用;可靠性和故障排除;附錄A術語詞彙表;附錄B國際單位制;附錄C倍數和次數;附錄D十進制、十六進制、二進制和ASCII表;附錄E2的冪次方;附錄F處理器插座;附錄G處理器數據;附錄H常見文件擴展名;附錄I BIOS錯誤代碼;附錄J製造商、供應商和分銷商;附錄K有用的網站;附錄L參考文獻;附錄M網絡上提供的參考資料;索引