Two-Phase Flows: Phenomena, Complexities and Applications
暫譯: 兩相流：現象、複雜性與應用

Singh, Jashanpreet, Kumar, Satish, Szala, Miroslaw

Two-Phase Flows: Phenomena, Complexities and Applications

相關主題

商品描述

The text explains the fundamental mechanisms and complexities involved in two-phase flow systems. It presents the physical and rheological properties of slurries, solid-liquid interactions, and the flow regimes. The book focuses on sector-specific use cases, including energy, mining, and processing systems. It highlights the use of machine learning models for predicting the rate of erosion based on experimental and material data.

This book:

  • Focuses on modeling approaches such as computational fluid dynamics, multiphase flow solvers, and simulation-based predictive tools relevant to both academic and industrial applications
  • Examines hydraulic issues associated with slurry transportation, such as pressure decline, loss of corrected energy, and the impacts of vortex production
  • Explains the dynamics of slurry erosion, inspecting the mechanisms under the influence of impact forces and wear processes, as well as the behaviour of materials
  • Discusses surface modification strategies, including thermal spraying, laser cladding, and surface alloying
  • Demonstrates machine learning models used for predicting the rate of erosion based on experimental and material data

It is primarily written for senior undergraduates, graduate students, and academic researchers in mechanical engineering, aerospace engineering, fluid dynamics, heat transfer, manufacturing engineering, production engineering, and materials science.

商品描述(中文翻譯)

本文說明兩相流系統所涉及的基本機制與複雜性，涵蓋漿體的物理與流變特性、固液交互作用，以及不同的流動型態。本書聚焦於能源、採礦與加工系統等產業領域的應用案例，並強調運用機器學習模型，根據實驗資料與材料資料預測侵蝕速率。

本書：

• 著重於計算流體力學（computational fluid dynamics）、多相流求解器（multiphase flow solvers）以及以模擬為基礎的預測工具等建模方法，適用於學術與工業應用

• 探討與漿體輸送相關的水力學問題，例如壓力下降、校正能量損失，以及渦旋生成所造成的影響

• 說明漿體侵蝕的動力學，檢視衝擊力與磨耗過程作用下的侵蝕機制，以及材料的行為

• 討論表面改質策略，包括熱噴塗、雷射熔覆與表面合金化

• 示範如何運用機器學習模型，根據實驗資料與材料資料預測侵蝕速率

本書主要 предназнач給機械工程、航空太空工程、流體力學、熱傳、製造工程、生產工程與材料科學領域的高年級大學生、研究生及學術研究人員閱讀。

作者簡介

Jashanpreet Singh is currently working as Assistant Professor in the University Centre of Research and Development and the Department of Mechanical Engineering at Chandigarh University, Mohali, India. He had obtained his PhD degree in the field of Slurry Erosion and Thermal Spray Coatings from the Thapar Institute of Engineering and Technology, Patiala, India, in 2019. He has done his BTech and MTech in Mechanical Engineering at Punjabi University, Patiala, India, in 2012 and 2014, respectively. He has a teaching experience of more than six years and industry experience of more than two years. His area of research is tribology-solid particle erosion, thermal spray coatings, CFD simulation, composites, and materials characterization. He has authored/edited five books under CRC Press & Taylor and Francis banner. He has authored over 100 research publications in various international journals, books, and conferences of repute. He is a life member of AICTSD, IAENG, and NITTSD.

Satish Kumar is presently working as Professor in the Department of Mechanical Engineering at the National Institute of Technology Jamshedpur, India. Currently he is holding the post of Dean (Research and Consultancy), Faculty In-charge Admission, Controller of Examination, Chairman of Institute Publication Cell, and Chairman of Institute Newsletter at NIT Jamshedpur, India. He has obtained his bachelor's and master's degree in Mechanical Engineering from SVNIT Surat in 2002 and 2004, respectively. He has completed his PhD under the supervision of Professor B. K. Gandhi, the Department of Mechanical and Industrial Engineering, IIT Roorkee, India, in the area of solid-liquid flow in 2014. His research interests are rheology of slurry flow, computational fluid dynamics, erosion wear, air jet erosion, high-temperature oxidation, and flow phenomena of solid-liquid flow in pump and pipeline. He has authored (and co-authored) over 150 research articles in the field of multiphase flows and coatings. He supervised 8 PhD and 55 MTech thesis in the area of multiphase flow. He has successfully completed five sponsored research projects funded by different agencies such as SERB, DST, and UGC. Currently, a total of three research projects are ongoing. He is a life member of ISTE, ASME, NSFMFP, IAENG, Institution of Engineers, NITTSD, etc.

Miroslaw Szala is presently working as Assistant Professor in the Department of Materials Engineering at the Lublin University of Technology, Lublin, Poland. His research interests are cavitation and slurry erosion, abrasion, tribology, failure analysis, additive manufacturing, thermal spraying, thin films, shot peening, ion implantation, hardfacing, welding, Co/Ni alloys, metal-matrix composites, stainless and structural steels, fatigue, and materials characterization. He has authored (and co-authored) over 90 research articles in different journals and conference proceedings. He has served as an editor for journals such as Advances in Science and Technology Research Journal, Materials, Crystals, Metals, and Processes. He is a reputed reviewer of many SCI and SCOPUS-indexed journals. He is the conference convener of one of the most reputed conferences in Poland namely Computational Methods in Engineering Science (CMES).

作者簡介(中文翻譯)

Jashanpreet Singh 目前任職於印度莫哈里的 Chandigarh University 研究與發展大學中心及機械工程學系，擔任助理教授。他於 2019 年取得印度帕蒂亞拉 Thapar Institute of Engineering and Technology 的博士學位，研究領域為漿料沖蝕與熱噴塗塗層。他分別於 2012 年及 2014 年在印度帕蒂亞拉 Punjabi University 取得機械工程學士及碩士學位。他擁有超過六年的教學經驗，以及超過兩年的產業經驗。其研究領域包括磨潤學（tribology）、固體粒子沖蝕、熱噴塗塗層、CFD 模擬、複合材料及材料特性分析。他曾以作者或編者身分，在 CRC Press 與 Taylor and Francis 旗下出版五本書，並於多種知名國際期刊、書籍及學術會議發表超過 100 篇研究論文。他是 AICTSD、IAENG 及 NITTSD 的終身會員。

Satish Kumar 目前任職於印度 National Institute of Technology Jamshedpur 機械工程學系，擔任教授。目前，他在印度 NIT Jamshedpur 擔任研究與顧問院長（Dean (Research and Consultancy)）、招生事務負責人（Faculty In-charge Admission）、考試主管（Controller of Examination）、研究院出版委員會主席（Chairman of Institute Publication Cell），以及研究院新聞稿主席（Chairman of Institute Newsletter）。他分別於 2002 年及 2004 年在 SVNIT Surat 取得機械工程學士及碩士學位。2014 年，他在印度 IIT Roorkee 機械與工業工程學系 B. K. Gandhi 教授的指導下完成博士學位，研究領域為固液流動。他的研究興趣包括漿料流變學、計算流體力學、沖蝕磨耗、氣流噴射沖蝕、高溫氧化，以及泵浦與管線中的固液流動現象。他在多相流與塗層領域以作者或共同作者身分發表超過 150 篇研究論文。他曾指導 8 篇博士論文及 55 篇 MTech 論文，研究主題皆為多相流。他已成功完成由 SERB、DST 及 UGC 等不同機構資助的五項研究計畫。目前共有三項研究計畫正在進行中。他是 ISTE、ASME、NSFMFP、IAENG、Institution of Engineers、NITTSD 等組織的終身會員。

Miroslaw Szala 目前任職於波蘭盧布林 Lublin University of Technology 材料工程學系，擔任助理教授。他的研究興趣包括氣蝕與漿料沖蝕、磨粒磨耗、磨潤學、失效分析、積層製造、熱噴塗、薄膜、噴丸強化、離子植入、表面堆焊、焊接、Co/Ni 合金、金屬基複合材料、不鏽鋼與結構鋼、疲勞，以及材料特性分析。他以作者或共同作者身分，在不同期刊及學術會議論文集中發表超過 90 篇研究論文。他曾擔任 Advances in Science and Technology Research Journal、Materials、Crystals、Metals 及 Processes 等期刊的編輯。他是多種 SCI 與 SCOPUS 索引期刊的知名審稿人。他擔任波蘭最具知名度的會議之一 Computational Methods in Engineering Science（CMES）的會議召集人。

類似商品

最後瀏覽商品 (2)