High-Speed Circuit Board Signal Integrity (Artech House Microwave Library)

Stephen C. Thierauf

  • 出版商: Artech House Publish
  • 出版日期: 2004-02-26
  • 售價: $4,960
  • 貴賓價: 9.5$4,712
  • 語言: 英文
  • 頁數: 264
  • 裝訂: Hardcover
  • ISBN: 1580531318
  • ISBN-13: 9781580531313
  • 相關分類: 微波工程 Microwave
  • 海外代購書籍(需單獨結帳)

買這商品的人也買了...

商品描述

Description

As circuit boards are increasingly required to transmit signals at higher and higher speeds, signal and power integrity become increasingly crucial. Rules of thumb that you have used over and over again to prevent signal loss no longer apply to these new, high-speed, high-density circuit designs. This leading-edge circuit design resource offers you the knowledge needed to quickly pinpoint transmission problems that can compromise your entire circuit design. Discussing both design and debug issues at gigabit per second data rates, the book serves as a practical reference for your projects involving high-speed serial signaling on printed wiring boards.

Step-by-step, this book goes from reviewing the essentials of linear circuit theory, to examining practical issues of pulse propagation along lossless and lossy transmission lines. It provides detailed guidelines for crosstalk, attenuation, power supply decoupling, and layer stackup tradeoffs (including pad/antipad tradeoffs). Other key topics include the construction of etched conductors, analysis of return paths and split planes, microstrip and stripline characteristics, and SMT capacitors. Filled with on-the-job-proven examples, this hands-on reference is the book that you can turn to time and again to design out and troubleshoot circuit signal loss and impedance problems.

 

Table of Contents

Characteristics and Construction of Printed Wiring Boards ‑ Unit System. PWB Construction. PWB Trace. Vias. Surface Finishes and Solder Mask.

Resistance of Etched Conductors ‑ Resistance at Low Frequencies. Loop Resistance and the Proximity Effect. Resistance Increase with Frequency: Skin Effect. Hand Calculations of Frequency Dependent Resistance. Resistance Increase due to Surface Roughness.

Capacitance of Etched Conductors ‑ Capacitance and Charge. Parallel Plate Capacitor. Self and Mutual Capacitance. Capacitance Matrix. Dielectric Losses. Environmental Effects on Laminate er and Loss Tangent.

Inductance of Etched Conductors ‑ Field Theory. Circuit Behavior of Inductance.? Inductance Matrix. Mutual Inductance. Hand Calculations for Inductance.

Transmission Lines ‑ General Circuit Model of a Lossy Transmission Line. Impedance. Traveling Waves.

Return Paths and Power Supply Decoupling ‑ Proper Return Paths. Stripline routed between Power and Ground Planes. Split Planes, Motes and Layer Changes. Connectors and Dense Pin Fields. Power Supply Bypass/Decoupling Capacitance. Connecting Decoupling Capacitors.

Serial Communication, Loss and Equalization - Harmonic Contents of a Data Stream. Line Codes. Bit Rate and Data Rate. Block Codes Used in Serial Transmission. Intersymbol Interference. Eye Diagrams. Equalization and Pre-Emphasis. DC Blocking Capacitors.

Single-Ended and Differential Signaling and Crosstalk - Odd and Even Modes. Multi-Conductor Transmission Lines. Differential Signaling, Termination and Layout Rules. Crosstalk.

Characteristics of Printed Wiring Stripline and Microstrips - Stripline. Microstrip. Losses in Stripline and Microstrip. Microstrip and Stripline Differential Pairs.

Surface Mount Capacitors - Ceramic Surface Mount Capacitors. SMT Tantalum Capacitors. Replacing Tantalum with High-Valued Ceramic Capacitors.

商品描述(中文翻譯)

描述

隨著電路板越來越需要以更高速度傳輸信號,信號和電源完整性變得越來越重要。你一再使用的經驗法則已不再適用於這些新的高速、高密度電路設計。這本領先的電路設計資源提供了你需要的知識,以快速找出可能危及整個電路設計的傳輸問題。本書討論了吉比特每秒數據速率下的設計和調試問題,是你在印刷電路板上進行高速串行信號傳輸項目時的實用參考。

本書循序漸進地從回顧線性電路理論的基礎開始,然後探討無損失和有損失傳輸線上的脈衝傳播的實際問題。它提供了有關串擾、衰減、電源解耦和層堆疊折衷(包括鍍銅墊/反墊折衷)的詳細指南。其他重要主題包括鍍銅導體的製造、回路路徑和分割平面的分析、微帶和帶線特性以及表面貼裝電容器。這本實用參考書充滿了實踐驗證的例子,是你在設計和排除電路信號損失和阻抗問題時可以一再翻閱的書籍。

目錄

印刷電路板的特性和結構 - 單位系統。電路板結構。電路板導線。通孔。表面處理和焊膠遮罩。

鍍銅導體的電阻 - 低頻電阻。迴路電阻和鄰近效應。頻率增加時的電阻:皮膚效應。頻率依賴電阻的手算。表面粗糙度導致的電阻增加。

鍍銅導體的電容 - 電容和電荷。平行板電容器。自身和互感電容。電容矩陣。介電損耗。層壓板的環境影響和損耗切線。

鍍銅導體的電感 - 场理論。電感的電路行為。互感。電感的手算。

傳輸線 - 有損失傳輸線的一般電路模型。阻抗。行波。

回路路徑和電源解耦 - 正確的回路路徑。在電源和地平面之間布線的帶線。分割平面、莫特和層變化。連接器和高密度引腳場。電源旁路/解耦電容。連接解耦電容。

服務條款和隱私政策