Embedded Controller Hardware Design

Ken Arnold

Embedded Controller Hardware Design
  • 出版商: A-List Publishing
  • 出版日期: 2001-01-29
  • 定價: $1,800
  • 售價: 9.0 折 $1,620
  • 語言: 英文
  • 頁數: 246
  • 裝訂: Paperback
  • ISBN: 1878707523
  • ISBN-13: 9781878707529
  • 相關分類: 嵌入式系統

    • 立即出貨 (庫存 < 3)

買這商品的人也買了...

商品描述

Description:

Ken Arnold is an experienced embedded systems designer and president of HiTech Equipment, Inc., an embedded systems design firm located in San Diego, California. He also teaches courses in embedded hardware and software design at the University of California-San Diego.

 

Table of Contents:

REVIEW OF ELECTRONICS FUNDAMENTALS: embedded microcontroller applications; microcontroller architectures; timing diagrams; the design and development process; MICROCONTROLLER CONCEPTS: von Neumann and Harvard architectures; 8052 architecture; 8051 instruction set; WORST-CASE TIMING, LOADING, ANALYSIS, AND DESIGN: fan-out and loading analysis; IC interfacing; noise analysis; worst-case design analysis; MEMORY TECHNOLOGIES AND INTERFACING: read/write memories; read-only memories; asynchronous and synchronous memory; memory management; CPU BUS INTERFACE AND TIMING: read/writer operations; address spaces and decoding; address, data, and control buses; DETAILED DESIGN EXAMPLE: the central processing unit; external data memory cycle; design problems; PROGRAMMABLE LOGIC DEVICES: introduction to programmable logic; I/O decoding and interfacing; IC design with PLDs; BASIC I/O INTERFACES: direct CPU I/O interfacing; direct memory access; elementary I/O devices; OTHER INTERFACES AND BUS CYCLES: interrupt cycles; software interrupts; hardware interrupts; OTHER USEFUL STUFF: electromagnetic compatibility; electrostatic discharge; fault tolerance; development tools; device selection; OTHER INTERFACES: analog signal conversion; proprietary synchronous serial interfaces; digital signal processing.

商品描述(中文翻譯)

描述：
Ken Arnold是一位有經驗的嵌入式系統設計師，也是位於加州聖地亞哥的嵌入式系統設計公司HiTech Equipment, Inc.的總裁。他還在加州大學聖地亞哥分校教授嵌入式硬體和軟體設計課程。

目錄：
1. 電子基礎知識回顧：嵌入式微控制器應用、微控制器架構、時序圖、設計和開發流程。
2. 微控制器概念：馮·諾依曼和哈佛架構、8052架構、8051指令集。
3. 最壞情況的時序、負載、分析和設計：負載分析、IC介面、噪音分析、最壞情況設計分析。
4. 記憶體技術和介面：讀寫記憶體、只讀記憶體、異步和同步記憶體、記憶體管理。
5. CPU匯流排介面和時序：讀寫操作、地址空間和解碼、地址、資料和控制匯流排。
6. 詳細設計示例：中央處理器、外部資料記憶體週期、設計問題。
7. 可程式邏輯裝置：可程式邏輯介紹、I/O解碼和介面、使用PLD進行IC設計。
8. 基本I/O介面：直接CPU I/O介面、直接記憶體存取、基本I/O裝置。
9. 其他介面和匯流排週期：中斷週期、軟體中斷、硬體中斷。
10. 其他有用的內容：電磁相容性、靜電放電、容錯能力、開發工具、設備選擇。
11. 其他介面：類比信號轉換、專有同步串行介面、數位信號處理。

類似商品