State of the Art and Future Trends in Materials Modelling 2
暫譯: 材料模擬的最新技術與未來趨勢 2

本卷書闡明了經典力學問題的令人興奮的新發展和方法。該領域持續進行研究的必要性源於對新工程解決方案的需求，這些解決方案能夠節省我們的資源並符合可持續性標準，以及其他考量，例如可回收性和環境相容性。這些需求促進了材料的特殊設計，例如複合材料。材料與結構之間的相互作用與不同的長度尺度有關，微觀、中觀或宏觀尺度方法的結合產生了新的應用可能性。此外，材料和結構越來越多地在各種物理場的影響下進行分析。

Holm Altenbach is a member of the International Research Center on Mathematics and Mechanics of Complex Systems (M&MoCS), Italy, and International Association of Applied Mathematics and Mechanics (GAMM). In 1996, he was appointed as a full professor (Engineering Mechanics) at the Martin Luther University Halle-Wittenberg, and since 2011, he has been a full professor at the Otto von Guericke University Magdeburg. He graduated from Leningrad Polytechnic Institute in 1980 (diploma with a distinction), defended his Ph.D. and obtained his postgraduate degree (habilitation) from the same university in 1983 and 1987, respectively. His areas of scientific interest are theory of plates and shells with applications, continuum mechanics and material modeling, generalized media, sandwiches and laminates. He is an Editor-in-Chief of the Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik (the oldest journal in mechanics in Germany) and of Springer's Advanced Structured Materials series. He is a member of the editorial board of several journals: among them Continuum Mechanics and Thermodynamics, Technische Mechanik, Mechanics of Composite Materials, and Journal of Strain Analysis for Engineering Design. He was awarded the Polish Humboldt Prize in 2018. In November 2019, he was elected as a Foreign Member of the Russian Academy of Sciences and in May 2021 as a Foreign Member of the National Academy of Sciences of Ukraine. Since October 1st, 2022, he is retired. In 2024 he was awarded the Lomonosov Gold Medal of the RAS.

Andreas Öchsner is a full professor of Lightweight Design and Structural Simulation at Esslingen University of Applied Sciences, Germany. After completing his Dipl.-Ing. degree in Aeronautical Engineering at the University of Stuttgart (1997), he served as a research and teaching assistant at the University of Erlangen-Nuremberg from 1997 to 2003 while pursuing his Doctor of Engineering Sciences (Dr.-Ing.) degree. From 2003 to 2006, he was an assistant professor at the Department of Mechanical Engineering and the head of the Cellular Metals Group affiliated with the University of Aveiro, Portugal. He spent seven years (2007-2013) as a full professor at the Department of Applied Mechanics, Technical University of Malaysia, where he was also the head of the Advanced Materials and Structure Lab. From 2014 to 2017, he was a full professor at the School of Engineering, Griffith University, Australia.

霍姆·阿爾滕巴赫是意大利複雜系統數學與力學國際研究中心 (M&MoCS) 和應用數學與力學國際協會 (GAMM) 的成員。1996年，他被任命為哈雷-維滕堡馬丁路德大學的全職教授（工程力學），自2011年以來，他一直是馬格德堡奧托·馮·古里克大學的全職教授。他於1980年畢業於列寧格勒理工學院（以優異成績獲得文憑），並於1983年和1987年分別在同一所大學獲得博士學位和博士後學位（habilitation）。他的科學研究興趣包括板和殼的理論及其應用、連續介質力學和材料建模、廣義介質、夾層和層壓材料。他是《應用數學與力學期刊/Zeitschrift für Angewandte Mathematik und Mechanik》（德國最古老的力學期刊）和施普林格的《先進結構材料系列》的主編。他還是幾本期刊的編輯委員會成員，其中包括《連續介質力學與熱力學》、《技術力學》、《複合材料力學》和《工程設計應變分析期刊》。他於2018年獲得波蘭洪堡獎。2019年11月，他被選為俄羅斯科學院外籍成員，2021年5月被選為烏克蘭國家科學院外籍成員。自2022年10月1日起，他已退休。2024年，他獲得俄羅斯科學院的洛莫諾索夫金獎。

安德烈亞斯·厄赫斯納是德國埃斯林根應用科技大學的輕量設計與結構模擬全職教授。在斯圖加特大學完成航空工程的Dipl.-Ing.學位後（1997年），他於1997年至2003年在埃爾朗根-紐倫堡大學擔任研究和教學助理，同時攻讀工程科學博士學位（Dr.-Ing.）。2003年至2006年，他在葡萄牙阿維羅大學的機械工程系擔任助理教授，並擔任細胞金屬小組的負責人。他在馬來西亞科技大學的應用力學系擔任全職教授七年（2007-2013），同時也是先進材料與結構實驗室的負責人。2014年至2017年，他在澳大利亞格里菲斯大學的工程學院擔任全職教授。