Practical Cryostat Design and Construction: Technologies and Customization
暫譯: 實用低溫恆溫器設計與建造：技術與客製化

實用低溫恆溫器設計與建造：技術與客製化

《實用低溫恆溫器設計與建造：技術與客製化》介紹各種在低溫環境下進行的實驗與應用，以及其中所採用的創新工作。由於客製化工程高度仰賴經驗，且可用資源有限，本書將分享作者在此領域累積的豐富經驗。本書分為兩大部分：低溫恆溫器設計，以及製造技術。對於致力於設計與開發低溫平台的低溫技術領域科學家與工程師而言，本書將極具參考價值。

主要特色：

• 著重於客製化低溫系統的設計與建造，串聯基礎低溫原理與實際工程實作。

• 涵蓋廣泛的低溫研究與工程主題，包括 helium-3 系統、稀釋冷凍機、絕熱去磁冷凍機、超導磁體整合、真空技術、熱管理、振動降低，以及低溫配線與纜線技術。

本書適合學術界與產業界的讀者，尤其適合參與低溫技術與低溫實驗系統的職涯初期學生、研究人員與工程師。

Dr. Zuyu Zhao received his B.S. degree from Fudan University in 1982, Class 77. He came to the United States in 1983 with the World Bank Scholarship program and graduated from Northwestern University with a Ph.D. degree in physics in 1990. He then spent two and a half years working at Harvard University as a Research Associate and set up a new ultra-low temperature lab pursuing Bose-Einstein condensation on spin polarized hydrogen. Dr. Zhao joined Janis Research Company (later American Cryogenics dba JanisULT) in 1993 and focused on developing custom ultra-low temperature facilities for the research and science community. He was a scientist at both Janis Research and JanisULT as well as the trustee of the company. Dr. Zhao also served from July 1, 2007 through June 30, 2013 as an elected member of the American Institute of Physics (Physics Today) Advisory Committee. Before he retired in late 2023, he had served as the Chief Cryogenic Scientist for 15 months after the business merged to FormFactor LLC and helped with smooth business and technical transfer.

Dr. Zhitao Wang received his B.S. degree from Hebei University in 2001. He then pursued his Ph.D. at the Institute of Physics, Chinese Academy of Sciences, during which he spent two years at Tohoku University as an exchange student. After receiving his Ph.D. in 2006, Dr. Wang worked at Trinity College Dublin, Pacific Northwest National Laboratory, and Tufts University (joint with Harvard University). His research focused on surface science at cryogenic temperatures, particularly low-temperature scanning probe microscopy. In 2017, he joined Janis Research Company (later JanisULT) as a cryogenic engineer, specializing in custom low-temperature systems. After FormFactor acquired JanisULT in 2022, he became a cryogenic scientist, working on the development of customized helium-3 systems and dilution refrigerators. In late 2024, Dr. Wang joined Commonwealth Fusion Systems, where he is currently helping to develop cooling systems for powerful high-Tc superconducting magnets.

Zuyu Zhao 博士於 1982 年取得 Fudan University 理學士學位，為 77 級畢業生。1983 年，他透過 World Bank Scholarship 計畫來到美國，並於 1990 年取得 Northwestern University 物理學博士學位。之後，他在 Harvard University 擔任兩年半的研究助理，並建立新的超低溫實驗室，研究自旋極化氫中的 Bose-Einstein 凝聚。

Zhao 博士於 1993 年加入 Janis Research Company（後更名為 American Cryogenics，並以 JanisULT 名義營運），專注於為研究與科學社群開發客製化超低溫設備。他曾在 Janis Research 和 JanisULT 擔任科學家，並擔任該公司的受託人。Zhao 博士也於 2007 年 7 月 1 日至 2013 年 6 月 30 日期間，擔任由選舉產生的 American Institute of Physics（Physics Today）諮詢委員會委員。2023 年底退休前，他在公司併入 FormFactor LLC 後擔任首席低溫科學家 15 個月，並協助順利完成業務與技術移轉。

Zhitao Wang 博士於 2001 年取得 Hebei University 理學士學位。之後，他進入 Chinese Academy of Sciences Institute of Physics 攻讀博士學位，期間曾以交換學生身分在 Tohoku University 研習兩年。2006 年取得博士學位後，Wang 博士曾任職於 Trinity College Dublin、Pacific Northwest National Laboratory，以及 Tufts University（與 Harvard University 聯合任職）。他的研究專注於低溫下的表面科學，尤其是低溫掃描探針顯微術。

2017 年，他加入 Janis Research Company（後更名為 JanisULT），擔任低溫工程師，專門從事客製化低溫系統的開發。2022 年 FormFactor 收購 JanisULT 後，他成為低溫科學家，負責客製化氦-3 系統與稀釋製冷機的開發。2024 年底，Wang 博士加入 Commonwealth Fusion Systems，目前協助開發用於高功率高 Tc 超導磁體的冷卻系統。